COVID-19 has changed the way we live. In the post epidemic period, disinfection and epidemic prevention in public places is still a normal measure that cannot be ignored. Routine disinfection is essential for the foreseeable future. Pudu Robotics has always adhered to the concept of "science and technology for good" and provided multiple solutions to deal with the negative impact of viruses. Through two disinfection modes of ultraviolet ray and ultra dry fog, Puductor 2, can minimize the risk of cross infection and improve the sanitary conditions of indoor environment.

Features

188µW/cm2

UV-C Disinfection

2L/H Ultrasonic

Dry Mist Disinfection

Max 6H

Disinfection Time

15L

Reservoir Capacity

360˚

Sterilization

2L/H Ultrasonic

Dry Mist Disinfection

Boil-dry Protection

and Low-level Warning  

15L

Reservoir Capacity

Ultrasonic Dry Mist Disinfection

15L Reservoir Capacity

ultra-large capacity Users do not need to replace and supplement the disinfection solution frequently.

≤10µm Dry Disinfectant Particles

Dry disinfectant particles ≤ 10µm to ensure full contact with microorganisms. Full coverage, no dead corner disinfection and sterilization, and complete disinfection of hard-to-reach places.

2.0L/h Max Atomization Rate

4 mist outputs(adjustable): According to different application scenarios, users can conveniently adjust the output rate of dry mist to achieve the best disinfection effect. 

Ultraviolet C Disinfection

99.99% Disinfection Rate

Using 4 * 36w ozone-free UV lamps, the illumination at 1 meter can reach 188μW/cm2, reaching the leading level in the industry. UV-C ultraviolet rays can effectively disinfect and sterilize most bacteria and germs, with disinfection efficiency up to 99.99%. 

Intelligent UV-C Lamp Protector

The motor interlock mechanism is used at the UV lamp shade to keep it closed under the non UV working state, so as to avoid damage to the lamp tube caused by movement impact.

Automatic Recharging

Puductor 2 is equipped with two batteries, the total capacity of which is 51.2Ah, and the disinfection time can be up to 6 hours, which can satisfy the disinfection of 12~15 rooms (20 m2/room).And it has a docking station to ensure that the robot is fully charged and ready for the next task, time saving as it requires no involvement from your staff.

Boil-dry Protection and Low-level Warning

The ultrasonic chamber is equipped with liquid level detection. When the liquid level is lower than the safe level, the Puductor 2 will automatically stop the ultrasonic spray. The solution tank is also equipped with liquid level detection. When the liquid level is lower than the safe level, the Puductor 2 will remind the user to replenish the disinfectant.

Motion Sensor

Equipped with a millimeter wave motion sensor. If someone is detected within 3 meters, it will turn off the ultraviolet light and spray it automatically. 

Pudu IoT Management Platform

Remote Access

Support remote terminal to control robot operation, suspend emergency tasks and print work reports.

Automatic Work Report Generation

Generate work reports automatically, check disinfection status of target areas.

 

Autonomous Functions

Laser SLAM Self-Driving Solution

Able to move freely in a 10,000m² space

Detection range up to 40m

Real-time positioning error less than 10cm

 

 

3D Obstacle Avoidance Technology

INTEL➅ REALSENSE™ RGBD camera

Powerful 3D perception

Accurately detect obstacles, stopping within a reaction time of 0.5 seconds

 

Workflow

Automatic Mode

1. The staff checks the capacity of the disinfectant solution.

2. The staff sets disinfection tasks. Cruise Mode: total disinfection time，driving path and disinfection method Fixed-point Mode: single point/multi-point disinfection and disinfection method

3. Puductor 2 automatically reaches the initial point of work.

4. Puductor 2 begins to count down, and notifies people to stay away from the disinfection areas.

5. Puductor 2 completes the task as programmed or the staff terminates the task remotely.

6. Puductor 2 automatically returns to the charging dock.

Quick Mode

1. The staff manually pushes the Puductor 2 to the disinfection point.

2. The staff checks the capacity of the disinfectant solution.

3. The staff sets disinfection tasks (total disinfection time, disinfection method).

4. Puductor2 begins to count down, and notifies people to stay away from the disinfection areas.

5. Puductor 2 completes the task as programmed or the staff terminates the task remotely.

6. The staff manually pushes Puductor 2 back to the charging dock.